Technical data

Command Line Reference
Check Point VSX Administration Guide NGX R67 | 193
vsx resctrl enforce
Description
Configures the Resource Control Enforcer and shows its current status.
This command overrides the settings in the Resource Control
configuration file, but does not survive reboot.
Syntax
vsx resctrl enforce {enable | disable | show}
Parameters
Parameter
Description
enable
Enables Resource Enforcer
disable
Disables Resource Enforcer
show
Displays whether Resource Enforcer is enabled or
disabled
vsx resctrl monitor
Description
Configures the Resource Monitor and shows its current status. This
command overrides the settings in the Resource Control configuration
file, but does not survive reboot.
Syntax
vsx resctrl monitor {enable | disable | show}
Parameters
Parameter
Description
enable
Enables Resource Monitor
disable
Disables Resource Monitor
show
Displays whether Resource Monitor is enabled or
disabled
vsx resctrl traffic_stat
Description
Displays the number of received and dropped packets for a Virtual
System. The counter can be reset using the vsx resctrl reset
command.
Syntax
vsx resctrl -w {vsid} traffic_stat
Parameters
Parameter
Description
-w {vsid}
Displays the statistics for the Virtual System
specified in {vsid}. The default vsid is 0.
vsx resctrl reset
Description
Resets the Resource Control monitoring statistics.
Syntax
vsx resctrl reset