Technical data

Command Line Reference
Check Point VSX Administration Guide NGX R67 | 191
vsx sic reset
Description
Resets SIC for the specified Virtual System
Syntax
vsx sic reset {vsname|vsid}
Parameters
Parameter
Description
vsname|vsid
Specify the Virtual System name or ID.
Output
[Expert@gateway:0]#
[Expert@gateway:0]# fw vsx sic reset 1
resetting SIC for VSID 1
[Expert@gateway:0]#
Note - On the management server, use the cpca_client
revoke_cert command to cancel the old certificate. In
SmartDashboard, open the Virtual System object for editing. Click OK.
This action creates a new certificate, and transfers the certificate to the
gateway.
Link Aggregation CLI Commands
cphaconf show_bond
Displays the status of an interface bond, or with the -a argument, a summary table of all bonds. When a
bond is specified information for each slave interface is also displayed.
Syntax
cphaconf show_bond < <bond-name>|-a>
Example
[Expert@GW-1]# cphaconf show_bond bond0
Bond name: bond0
Bond mode: Load Sharing
Bond status: Up
Balancing mode: 802.3ad Layer3+4 Load Balancing
Configured slave interfaces: 4
In use slave interfaces: 4
Required slave interfaces: 2
Slave Name | Status | Link
--------------------------------------------
eth2 | Active | Yes
eth3 | Active | Yes
eth4 | Active | Yes
eth5 | Active | Yes