Technical data

Managing VSX Clusters
Check Point VSX Administration Guide NGX R67 | 103
Topology
The Topology page contains interface and routing definitions.
Interfaces
The Interfaces section defines interfaces and links to devices. You can add new interfaces as well as delete
and modify existing interfaces.
To add an interface:
1. Click Add.
2. In In the Interface Properties window, select an interface from the list and define the appropriate
properties ("Modifying an Interface Definition" on page 63).
The Cluster Members tab in the Interface Properties window contains cluster member IP address and net
mask definitions each interface.
To Modify an interface:
1. Double-click an interface.
2. In the Interface Properties window, enter an IP address and/or net mask value.
3. Modify other parameters as required.
Routes
The Routes section defines routes between Virtual Systems, external network devices, network addresses,
and other virtual devices. Some routes are defined automatically based on the interface table. You can add
new interfaces as well as delete and modify existing interfaces.
To add a default route to the routing table:
1. Click Add Default Routes and either enter the default route IP address or select the default router.