Technical data
Configuring VSX
Check Point VSX Administration Guide NGX R67 | 53
Virtual Switch - General Properties
The General Properties page allows you to add comments and change the icon color as displayed in
SmartDashboard.
Virtual Switch - Topology
The Topology page defines Virtual Switch interfaces. You can only modify the single defined interface.
Warp interfaces cannot be modified from this window.
To add an interface, click Add. The Interface Properties window opens. Select an interface from the list
and define the IP address, net mask and other properties as required. Refer to the Modifying an Interface
Definition section ("Modifying an Interface Definition" on page 63) or the online help for details regarding the
various properties and options.
Deleting a Virtual Switch
You must remove all Virtual System connections before attempting to delete a Virtual Switch.
To delete a Virtual Switch, right-click the appropriate Virtual Switch object in the Object Tree and select
Delete. Click Yes in the confirmation box.
Working with Virtual Routers
This section describes how to define and configure a Virtual Router. As with physical routers, each Virtual
Router maintains a routing table containing entries that describe known networks and directions on how to
reach them.