Technical data
Configuring VSX
Check Point VSX Administration Guide NGX R67 | 44
Shared Interface or Separate Interfaces
The Virtual System Network Configuration page for the Shared Interface and Separate Interfaces
templates appears as shown.
To configure the external and internal interfaces:
1. Select the desired interfaces from the appropriate list.
2. If the selected Interface is a VLAN interface, enter the VLAN tag in the appropriate field. This field is not
available for non-VLAN interfaces.
3. Enter the IP address and net mask in the appropriate fields. Optionally, enter a default gateway for the
external interface.
4. Complete the definition process ("Completing the Definition" on page 47).
Separate Interfaces in Bridge Mode
The Virtual System Network Configuration page for the Separate Interfaces template in the Bridge Mode
appears as shown.