Technical data

Command Line Reference
Check Point VSX Administration Guide NGX R67 | 205
+-------------------------------------------------------+-----+--------
-+
|Routes |Mgmt |VSX
GW(s)|
+---------------+--------------+-------------+----------+-----+--------
-+
|Destination |Mask |Gateway |Interface | |Member3
|
+---------------+--------------+-------------+----------+-----+--------
-+
|172.23.50.0 |255.255.255.0 | |wrp128 | V | V
|
|20.10.10.0 |255.255.255.0 | |eth1.51 | V | V
|
|20.30.30.0 |255.255.255.0 |172.23.50.82 | | V | V
|
+---------------+--------------+-------------+----------+-----+--------
-+
Routing Table Legend:
V - Route exists on the gateway and matches management information.
- - Route does not exist on the gateway.
N/A - Fetching Virtual Device configuration from the gateway failed.
!NH - Route exists on the gateway, but there is a Next Hop mismatch.
Description Display VSLS load sharing configuration and status
Usage vsx_util vsls
Output
Sample output:
vsx_util vsls
Enter SmartCenter Server/main Domain Management Server IP address (Hit
'ENTER' for 'localhost'):
Enter Administrator Name:
Enter Administrator Password:
Enter ClusterXL Load Sharing cluster object name:
VSID| VS name | m5 | m6 | m7 | Weight |
----+---------+-----------+-----------+-----------+--------+
10 | vs1 | 0 | 1 | 2 | 10 |
11 | vs2 | 2 | 0 | 1 | 10 |
12 | vs3 | 1 | 2 | 0 | 10 |
13 | vs4 | 0 | 2 | 1 | 10 |
15 | vs5 | 1 | 0 | 2 | 10 |
20 | vs6 | 2 | 1 | 0 | 10 |
----+---------+-----------+-----------+-----------+--------+
Total weight | 20 | 20 | 20 | 60 |
----+---------+-----------+-----------+-----------+--------+
Legend:
0 - Highest priority
1 - Next priority
2 - Lowest priority
vsls
Description
Displays the Virtual System Load Sharing Menu, which allows you to
perform a variety of configuration tasks for Load Sharing deployments.
You perform configuration tasks ("Configuring Virtual System Load
Sharing" on page 113) interactively by following the instructions on the
screen.
Syntax
vsx_util vsls