Technical data
Command Line Reference
Check Point VSX Administration Guide NGX R67 | 201
issue and then run the vsx_util reconfigure ("reconfigure" on page 201) command to complete the
process.
If you select the Apply changes to management Only option, you can select another interface from list
(if any are available) or select the option to add a new interface.
change_mgmt_subnet
Description
Change the gateway or member management subnet
Syntax
vsx_util change_mgmt_subnet
Input
VSX gateway/member object name
New subnet mask
Comments
Backup the management database before using this command
Only automatically generated routes are changed by the command
script. You must remove and/or change all manually created routes
using the previous management subnet.
To perform this action, execute the command and follow the
instructions on the screen. Reboot the VSX gateway or cluster
members after the command script finishes.
convert_cluster
Description
Converts the cluster type from high availability to VSLS or from VSLS to
high availability
Syntax
vsx_util convert_cluster
Input
VSX cluster object name
ClusterXL mode: HA for high availability or LS for Virtual System
Load Sharing
Comments
Backup the management database before using this command.
To perform this action, execute the command and follow the
instructions on the screen.
When switching to high availability, all Virtual Systems are active on
the same member by default. Peer Virtual Systems are standby on
other members.
When converting to VSLS, all members must be in the Per Virtual
System state.
reconfigure
Description
Restores a VSX configuration to a newly installed gateway or cluster
member
Syntax
vsx_util reconfigure
Input
VSX cluster member name
SIC activation key assigned to the Security Management Server or
Domain Management Server
Retype to confirm the SIC activation key