Technical data

Command Line Reference
Check Point VSX Administration Guide NGX R67 | 194
vsx resctrl start
Description
Initializes Resource Control. Use this command after changing the
weights of the Virtual Systems in the configuration file.
Syntax
vsx resctrl [-v] start
Parameters
Parameter
Description
-v
Verbose mode displays the configuration of the
Resource Control Monitor and the Resource
Control Enforcer during initialization.
vsx resctrl stat
Description
Displays CPU consumption per-Virtual System, and serves as an accurate
indicator of the total CPU consumption by all Virtual Systems. CPU
consumption is expressed as a percentage of the total CPU resources.
Syntax
vsx resctrl [-u | -q] stat
Parameters
Parameter
Description
-u
Displays information per PU (SMP only).
-q
Do not display header row
Output Without Arguments
Virtual Systems CPU Usage Statistics
====================================
Number of CPUs/Hyper-threading: 4
Monitoring active time: 14s
ID Name |Weight| 1sec 10sec 1min 1hr 24hr*
================+======+==================================
0 VSX2 | N/A | 0.11 0.06 0.08 0.07 0.01
1 VSX2_vs1 | 10 | 15.80 21.57 21.75 22.28 1.94
2 VSX2_vsw | N/A | 0.00 0.00 0.00 0.00 0.00
3 VSX2_vs2 | 10 | 16.91 22.57 22.77 23.09 2.01
================+======+==================================
Total VS CPU Usage | 32.82 44.20 44.60 45.44 3.96
=======================+==================================
System CPU Usage | 99 99 99 99 89
Output with -u argument