Technical data

Command Line Reference
Check Point VSX Administration Guide NGX R67 | 187
VSX Command
This section describes the vsx commands.
Note - fw6 vsx commands are not supported. Because all IPv6 commands require
a corresponding IPv4 connection, fw6 vsx commands are not necessary.
vsx fetch
Description
Fetches the most current configuration files from
the Main Domain Management Server, and applies it to
the VSX gateway.
Syntax
vsx fetch [-v] [-q] [-s] local
vsx fetch [-v | -q| -s] [-f conf_file]
vsx fetch [-v | -q] -C "command"
vsx fetch [-v | -q| -c| -n| -s] [management]
Parameters
Parameter
Description
-c
Cluster mode
-n
Do not run local.vsall if VSX configuration, as
fetched from management server, is up-to-date.
-s
Concurrent fetches for multi-processor
environment.
-q
Quiet mode - Only summary lines appear.
-v
Verbose mode - Detailed information appears.
-f conf_file
Fetches NCS commands configuration file instead
of the default local.vsall.
local
Reads local.vsall configuration file from
$FWDIR/state/local/vsx and executes the
NCS
management
Fetches local.vsall from management,
replaces and runs it.
-C command
Execute NCS command
Return Value
0 (zero) indicates that the command executed successfully. Any other
response indicates an error.