Technical data

Deploying VSX
Check Point VSX Administration Guide NGX R67 | 178
Please select one of the following interfaces to be replaced:
1) lan0
2) lan1
Enter your choice:2
Please select one of the following interfaces to replace eth1:
1) A new interface name
Enter your choice:1
WARNING! Interface name must exist on VSX gateway/cluster members or
the operation will fail.
Enter new interface name: eth0
7. When prompted, select the interface to be replaced.
8. When prompted, enter 1 and then enter the new interface name .
9. When prompted to change another interface, enter "y" when prompted and repeat steps 7and 8 as
required.
10. To complete the process, enter "n".
11. Open SmartDashboard and connect to the management server.
12. Open the VSX gateway or cluster object.
13. Select Physical Interfaces and select and remove all of the old interface names.
14. Click OK to complete the configuration.
15. On the VSX gateway or cluster members, run the vsx_util reconfigure ("reconfigure" on page 201)
command.
16. Reboot the VSX gateway or cluster members.