Technical data
Managing VSX Clusters
Check Point VSX Administration Guide NGX R67 | 102
Creation Templates
The Creation Templates page displays the creation template used to create Virtual Systems. You can
change from the current creation template to the Custom Configuration template and change the shared
physical interface if the Shared Interface template is active.
Select the Custom Configuration option to change from the Shared Interfaces or Separate Interfaces
templates.
You cannot change back from the Custom Configuration template once you have completed the
definition and saved it to the configuration to cluster.
To change the shared interface, click Settings and select an interface from the list that appears.
Physical Interfaces
The Physical Interfaces page allows you to add or delete a physical interface on the VSX gateway, and to
define interfaces to be used as VLAN trunks.
To add a new physical interface, click Add and enter the interface name in the appropriate field.
To define an interface as a VLAN trunk, select the desired interface and enable the VLAN Trunk option.
To disable a VLAN trunk, clear the option.
Synchronization
The Synchronization window displays the state synchronization network. There are no configurable
properties.