Technical data
Managing VSX Clusters
Check Point VSX Administration Guide NGX R67 | 100
Cluster Members
The Cluster Members page enables you to view and/or modify several properties for individual cluster
members, including IP addresses for members and the internal communication network. You can also view
where cluster and member objects in the object database are used.
Gateway Cluster Member List
This tab shows the currently defined cluster members. Double-click on a member or select a member and
click Edit to open its Cluster Member Properties window. You can modify the following member properties
on various tabs as follows:
General Tab:
Comment: Free text comment that appears in the Object List and elsewhere
Color: Color of the object icon as it appears in the Object Tree
Secure Internal Communication: Check and reset SIC trust
Topology Tab: Displays the member IP address and net mask for each interface. Double click on
an interface to displays its properties.
NAT Tab: Allows you to define NAT ("Virtual System - NAT" on page 49) rules for cluster members
connected to a Virtual Router.
VPN Tab: Contains a variety of configuration properties for site-to-site VPN deployments. This
window is only available if the Check Point VPN product is enabled on the General Properties
page.
Please refer to the online help and the R75 VPN Administration Guide
(http://supportcontent.checkpoint.com/documentation_download?ID=11675) for further details
regarding VPN concepts and configuration.