Technical data

Restoring Using the LCD Panel
Restoring Factory Defaults Page 35
5. While booting up, the following text appears:
6. When this text appears, there are approximately four seconds to press any key in order to bring up the
boot grub menu. Once the boot grub menu is displayed, there will be approximately ten seconds to
press any key or the machine will continue booting up.
7. Scroll down the grub menu to highlight Reset to factory defaults.
Select the relevant default image version.
8. Press Enter.
Restoring Using the LCD Panel
To restore the Smart-1 appliance to its default factory configuration using the LCD Panel keys:
1. Reboot or power on the appliance.
2. When the countdown begins, press any of the arrow keys.
The Boot menu appears.
3. Using the arrow buttons, scroll to the relevant image version, and then press the UP arrow.
4. Confirm the reset by pressing the UP arrow.
Pressing any other key causes the Action Canceled message to appear:
At this point, pressing any key returns you to the boot menu.