Technical data

Attaching the Mounting Brackets to the Rack
Rack Mounting Smart-1 50/150 Page 16
You can also use the appliance ear brackets to prevent the appliance from sliding in and out of the rack, by
attaching the bracket ears to the rack vertical rail.
You don't need to be in the server room to attach the appliance handles or ear brackets to the appliance.
To connect the appliance bracket ears or handles to the front of the appliance:
1. Attach the appliance ear bracket to one side of the appliance. For Smart-1 50 use three screws. For
Smart-1 150 use two screws.
2. Repeat for the other side of the appliance.
Attaching the Mounting Brackets to the
Rack
Attach the mounting brackets to the rack:
1. While standing in the front of the rack, place a mounting bracket in position on one side of the rack
2. Attach the mounting bracket to the rack vertical rail at the front using two screws:
a) Place a round washer on a rack mounting screw, then a square washer
b) Attach the mounting bracket to the rack vertical rails using the screw and washers. For now, do not
fully tighten the screw.
c) Repeat for the second screw.
3. Go to the back of the rack.