User guide

Backing Up and Restoring the Safe@Office Appliance Configuration
758 Check Point Safe@Office User Guide
Restoring the Appliance Configuration from a USB Flash Drive
To restore the appliance configuration from a USB flash drive
1. Connect a USB flash drive to one of your Safe@Office appliance's USB ports.
For information on locating the USB ports, see Introduction on page 1.
2. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
3. Click Backup/Restore.
The Backup/Restore Wizard opens displaying the Step 1: Select Action dialog box.
4. Click Restore this gateway from a storage device.
5. Click Next.
The Safe@Office appliance is restored from the <MACAddress> folder on the USB
flash drive, where <MACAddress> is the appliance's MAC address. This may take
some time.
The Step 2: Restore Complete screen appears displaying the configuration file's content
and the result of implementing each configuration command.