User guide

Backing Up and Restoring the Safe@Office Appliance Configuration
754 Check Point Safe@Office User Guide
Backing Up the Appliance Configuration to a USB Flash Drive
The USB flash drive must have at least 64MB of free space.
Note: Some USB flash drives may not be supported by the appliance.
To backup the appliance configuration to a USB flash drive
1. Connect a USB flash drive to one of your Safe@Office appliance's USB ports.
For information on locating the USB ports, see Introduction on page 1.
2. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
3. Click Backup/Restore.
The Backup/Restore Wizard opens displaying the Step 1: Select Action dialog box.
4. Click Backup this gateway to a storage device.
5. Click Next.