User guide

Setting the Time on the Appliance
734 Check Point Safe@Office User Guide
In this field...
Do this…
SNMP Port Type the port to use for SNMP.
The default port is 161.
Send SNMP Traps Select this option to enable sending SNMP traps. An SNMP trap is a
notification sent from one application to another.
Send Traps On:
Startup / Shutdown
Indicates that SNMP traps will automatically be sent upon
startup/shutdown events.
This option is always selected.
Send Traps On:
SNMP Authentication
Failure
Select this option to to send an SNMP trap on each SNMP
authentication failure event.
Send Traps On: Link
up/down
Select this option to send an SNMP trap on each link up/down event.
Trap Community Type the SNMP community string of the trap receiver.
The default value is
public.
Trap Port Type The UDP port of the trap receiver.
The default value is 162.
Trap Destination Type the IP address or DNS name of the SNMP trap receiver agent.
Trap Type Select the type of SNMP traps to use.