User guide

Configuring HTTPS
Chapter 23: Maintenance 729
2. Specify from where HTTPS access to the Safe@Office Portal should be
granted.
See Access Options on page 730 for information.
Warning: If remote HTTPS is enabled, your Safe@Office appliance settings can be
changed remotely, so it is especially important to make sure all Safe@Office
appliance users’ passwords are difficult to guess.
Note: You can use HTTPS to access the Safe@Office Portal from your internal
network, by surfing to https://my.firewall.
If you selected Internal Networks + IP Range, additional fields appear.
3. If you selected Internal Networks + IP Range, enter the desired IP address range
in the fields provided.
4. Click Apply.
The HTTPS configuration is saved. If you configured remote HTTPS, you can now
access the Safe@Office Portal through the Internet, using the procedure Accessing the
Safe@Office Portal Remotely on page 116.