User guide

Configuring a Gateway Hostname
724 Check Point Safe@Office User Guide
6. Click Finish.
Configuring a Gateway Hostname
You can define a gateway hostname for the Safe@Office appliance. The gateway
hostname is used to identify the Safe@Office appliance and appears in the following
places:
• The Safe@Office Portal’s title bar
• The Safe@Office appliance's SNMP hostname
• Syslog messages sent by the Safe@Office appliance
• The command line prompt
By default, the Safe@Office appliance's MAC address is used as the gateway hostname.
Note: Configuring the gateway hostname is only available if the Safe@Office
appliance is not subscribed to the Remote Management service. When remotely
managed, the gateway hostname is set by the Service Center.
To configure the gateway hostname
1. Click Setup in the main menu, and click the Firmware tab.
The Firmware page appears.
2. In the Gateway Name row, click Edit.