User guide

Using RADIUS Authentication
Chapter 20: Managing Users 691
In this field…
Do this…
Realm If your organization uses RADIUS realms, type the realm to append to
RADIUS requests. The realm will be appended to the username as
follows: <username>@<realm>
For example, if you set the realm to “myrealm”, and the user "JohnS"
attempts to log in to the Safe@Office Portal, the Safe@Office appliance
will send the RADIUS server an authentication request with the
username “JohnS@myrealm”.
This field is optional.
Timeout Type the interval of time in seconds between attempts to communicate
with the RADIUS server.
The default value is 3 seconds.
RADIUS Accounting Select this option to enabling RADIUS accounting on the server.
The Accounting Port field and the Advanced Accounting area appear.
Accounting Port Type the port number on the RADIUS server's host computer to use for
RADIUS accounting purposes.
The default port number is 1813.
RADIUS User
Permissions
If the RADIUS VSA (Vendor-Specific Attribute) is configured for a user,
the fields in this area will have no effect, and the user will be granted the
permissions specified in the VSA.
If the VSA is not configured for the user, the permissions configured in
this area will be used.