User guide

Logging in to a Remote Access VPN Site
Chapter 19: Working With VPNs 655
Note: Disabling a VPN site eliminates the tunnel and erases the network topology.
a. Click the icon in the desired VPN site’s row.
A confirmation message appears.
b. Click OK.
The icon changes to
, and the VPN site is disabled.
Logging in to a Remote Access VPN Site
You need to manually log in to Remote Access VPN Servers configured for Manual Login.
You do not need to manually log in to a Remote Access VPN Server configured for
Automatic Login or a Site-to-Site VPN Gateway: all the computers on your network have
constant access to it.
Manual Login can be done through either the Safe@Office Portal or the my.vpn page.
When you log in and traffic is sent to the VPN site, a VPN tunnel is established. Only the
computer from which you logged in can use the tunnel. To share the tunnel with other
computers in your home network, you must log in to the VPN site from those computers,
using the same user name and password.
Note: You must use a single user name and password for each VPN destination
gateway.