User guide

Getting to Know Your Safe@Office 1000NW Appliance
40 Check Point Safe@Office User Guide
Label
Description
Internet.
Serial A serial (RS-232) port used for connecting computers in order to access the
Safe@Office CLI (Command Line Interface), or for connecting an external dialup
modem.
An RJ-45 to DB9 converter is supplied for your convenience.
Warning: Do not connect an Ethernet cable to the RJ-45 serial port.
USB Two USB 2.0 ports used for connecting USB-based printers or modems
RESET A button used for rebooting the Safe@Office appliance or resetting the
Safe@Office appliance to its factory defaults. You need to use a pointed object to
press this button.
• Short press. Reboots the Safe@Office appliance
• Long press (10 seconds or until the SYS LED begins to blink rapidly). Resets
the Safe@Office appliance to its factory defaults, and resets your
firmware to the version that shipped with the Safe@Office appliance.
This results in the loss of all security services and passwords and
reverting to the factory default firmware. You will have to re-configure
your Safe@Office appliance.
Do not reset the unit without consulting your system administrator.
PWR A power jack used for supplying power to the unit. Connect the supplied power
adapter to this jack.
ANT 1/
ANT 2
Antenna connectors, used to connect the supplied wireless antennas .