User guide

Using the EAP Authenticator
440 Check Point Safe@Office User Guide
Configuring Clients for Server Authentication on Wired
Connections
To configure a Microsoft Windows client for server authentication
1. In the START menu, click Control Panel.
2. Click Network Connections.
3. Right-click on Local Area Connection, and click Properties in the popup menu
that appears.
The Local Area Connection Properties dialog box appears displaying the General tab.
4. Click the Authentication tab.
The Authentication tab appears.
5. Select the Enable IEEE 802.1x authentication for this network check box.
6. In the EAP type drop-down list, select Protected EAP (PEAP).
7. Select the Authenticate as computer when computer information is available
check box.
8. Click Properties.