User guide

Getting to Know Your Safe@Office 1000N Appliance
Chapter 1: Introduction 29
Label
Description
RESET A button used for rebooting the Safe@Office appliance or resetting the
Safe@Office appliance to its factory defaults. You need to use a pointed object to
press this button.
• Short press. Reboots the Safe@Office appliance
• Long press (10 seconds or until SYS LED begins to blink rapidly). Resets the
Safe@Office appliance to its factory defaults, and resets your firmware
to the version that shipped with the Safe@Office appliance. This results
in the loss of all security services and passwords and reverting to the
factory default firmware. You will have to re-configure your Safe@Office
appliance.
Do not reset the unit without consulting your system administrator.
PWR A power jack used for supplying power to the unit. Connect the supplied power
adapter to this jack.
Front Panel
The Safe@Office 1000N appliance includes several status LEDs that enable you to
monitor the appliance’s operation.
For an explanation of the Safe@Office 1000N appliance’s status LEDs, see the table
below.
Figure 2: Safe@Office 1000N Appliance Front Panel