User guide

Using Secure HotSpot
Chapter 13: Setting Your Security Policy 419
Resetting 802.1x Locking
When 802.1x port-based security is configured for a LAN port, the first host that attempts
to connect to this port is “locked” to the port. In order to connect a different computer to
the port, you must first reset 802.1x locking.
To reset 802.1x locking on all ports
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Click Reset 802.1x.
A confirmation message appears.
3. Click OK.
The 802.1x status of all ports is reset to "Unauthenticated".
Using Secure HotSpot
You can enable your Safe@Office appliance as a public Internet access hotspot for specific
networks. When users on those networks attempt to access the Internet, they are
automatically re-directed to the My HotSpot page http://my.hotspot.
Note: You can configure Secure HotSpot to use HTTPS. In this case, the My HotSpot
page will be https://my.hotspot.