User guide

Setting the Firewall Security Level
Chapter 13: Setting Your Security Policy 395
This
level…
Does this…
Further Details
Block All Blocks all access between
networks.
All inbound and outbound traffic is blocked between
the internal networks.
This does not affect traffic to and from the gateway
itself.
The definitions of firewall security levels provided in this table represent the Safe@Office
appliance’s default security policy.
You can easily override the default security policy, by creating user-defined firewall rules.
For further information, see Using Rules on page 400.
Note: If the security policy is remotely managed, this lever might be disabled.
Note: Security updates downloaded from a Service Center may alter the security
policy and change these definitions.
To change the firewall security level
1. Click Security in the main menu, and click the Firewall tab.