User guide

Viewing Wireless Station Statistics
376 Check Point Safe@Office User Guide
This field…
Displays…
Interface The interface for which the route is configured
Origin The route's type:
• Connected Route. A route to a network that is directly connected
to the Safe@Office appliance
• Static Route. A destination-based or service-based static route.
See Using Static Routes on page 241.
• Dynamic Route. A route obtained through a dynamic routing
protocol, such as OSPF
• Source Route. A source-based static route. See Using Static
Routes on page 241.
Viewing Wireless Station Statistics
If the primary WLAN is enabled, you can view wireless statistics for individual wireless
stations.
To view statistics for a wireless station
1. Click Reports in the main menu, and click the My Computers tab.
The Active Computers page appears.
The following information appears next to each wireless station:
• The signal strength in dB
• A series of bars representing the signal strength
2. Mouse-over the information icon next to the wireless station.
A tooltip displays statistics for the wireless station, as described in the following table.
3. To refresh the display, click Refresh.