User guide

Using the Traffic Monitor
354 Check Point Safe@Office User Guide
3. To refresh all traffic reports, click Refresh.
4. To clear all traffic reports, click Clear.
Note: The firewall blocks broadcast packets used during the normal operation of your
network. This may lead to a certain amount of traffic of the type "Traffic blocked by
firewall" that appears under normal circumstances and usually does not indicate an
attack.
Configuring Traffic Monitor Settings
You can configure the interval at which the Safe@Office appliance should collect traffic
data for network traffic reports.
To configure Traffic Monitor settings
1. Click Reports in the main menu, and click the Traffic tab.
The Traffic Monitor page appears.
2. Click Settings.