User guide

Configuring Wireless Networks
336 Check Point Safe@Office User Guide
New fields appear.
The fields that appear depend on the hardware type.
7. In the Mode drop-down list, select Enabled.
The fields are enabled.
8. In the IP Address field, type the IP address of the VAP network's default
gateway.
The VAP network must not overlap other networks.
9. In the Subnet Mask field, type the VAP's internal network range.
10. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 199.
11. If desired, configure a DHCP server.