User guide

Configuring Wireless Networks
334 Check Point Safe@Office User Guide
To add or edit a VAP
1. Configure and enable the primary WLAN.
For information on configuring the primary WLAN manually, see Manually
Configuring a Wireless Network on page 321.
For information on using a wizard to configure the primary WLAN, see Using the
Wireless Wizard on page 314.
2. If you intend to use the 802.1x or WPA-Enterprise security mode for the VAP,
do one of the following:
• To use the Safe@Office EAP authenticator for authenticating wireless clients,
follow the workflow Using the Safe@Office EAP Authenticator for
Authentication of Wireless Clients on page 434.
You will be referred back to this procedure at the appropriate stage in the
workflow, at which point you can continue from the next step.
• To use a RADIUS server for authenticating wireless clients, configure a
RADIUS server.
See Using RADIUS Authentication on page 688.
3. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
4. Click Add Network.