User guide

Configuring Wireless Networks
322 Check Point Safe@Office User Guide
The Edit Network Settings page appears.
The fields that appear depend on the hardware type.
5. In the Mode drop-down list, select Enabled.
The fields are enabled.
6. In the IP Address field, type the IP address of the wireless network network's
default gateway.
The wireless network must not overlap other networks.
7. In the Subnet Mask field, type the wireless network’s internal network range.
8. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 199.
9. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 200.