User guide

Viewing and Deleting Classes
302 Check Point Safe@Office User Guide
In this field…
Do this…
Incoming Traffic:
Limit rate to
Select this option to limit the rate of incoming traffic belonging to this class.
Then type the maximum rate (in kilobits/second) in the field provided.
DiffServ Code Point Select this option to mark packets belonging to this class with a DiffServ
Code Point (DSCP), which is an integer between 0 and 63. Then type the
DSCP in the field provided.
The marked packets will be given priority on the public network according
to their DSCP.
To use this option, your ISP or private WAN must support DiffServ. You
can obtain the correct DSCP value from your ISP or private WAN
administrator.
Viewing and Deleting Classes
You cannot delete a class that is currently used by a rule. You can determine whether a
class is in use or not, by viewing the Rules page.
To view or delete an existing QoS class
1. Click Network in the main menu, and click the Traffic Shaper tab.
The Quality of Service Classes page appears with a list of all defined QoS classes.
2. To delete a QoS class, do the following:
a. In the desired class's row, click Erase.
A confirmation message appears.
b. Click OK.
The class is deleted.