Manualshelf

User guide

ManualsBrandsCheck Point Software Technologies ManualsNetworkingSafe@Office 1000NW
301302303304305306307308309310
Sample Implementation on Two Gateways
Chapter 8: Configuring High Availability 289
In this field…
Do this…
Group ID If multiple HA clusters exist on the same network segment, type the ID
number of the cluster to which the gateway should belong.
This must be an integer between 1 and 255.
The default value is 55. If only one HA cluster exists, there is no need
to change this value.
Sample Implementation on Two Gateways
The following procedure illustrates how to configure HA for the following two
Safe@Office gateways, Gateway A and Gateway B:
Table 51: Gateway Details
Gateway A
Gateway B
Internal Networks LAN, DMZ LAN, DMZ
Internet Connections Primary and secondary Primary only
LAN Network IP Address 192.169.100.1 192.169.100.2
LAN Network
Subnet Mask
255.255.255.0 255.255.255.0
DMZ Network IP Address 192.169.101.1 192.169.101.2
DMZ Network
Subnet Mask
255.255.255.0 255.255.255.0
The gateways have two internal networks in common, LAN and DMZ. This means that
you can configure HA for the LAN network, the DMZ network, or both. You can use
either of the networks as the synchronization interface.