User guide

Configuring High Availability on a Gateway
284 Check Point Safe@Office User Guide
Configuring High Availability on a Gateway
The following procedure explains how to configure HA on a single gateway. You must
perform this procedure on each Safe@Office appliance that you want to include in the HA
cluster.
To configure HA on a Safe@Office appliance
1. Set the appliance’s internal IP addresses and network range.
Each appliance must have a different internal IP address.
See Changing IP Addresses on page 198.
2. Click Setup in the main menu, and click the High Availability tab.
The High Availability page appears.
3. Select the Gateway High Availability check box.