User guide

Adding Internal Networks to Bridges
270 Check Point Safe@Office User Guide
Adding Internal Networks to Bridges
Note: In order to add a VLAN of any type (port-based, tag-based, VAP, or WDS link)
to the bridge, you must first create the desired VLAN.
For information on adding port-based VLANs, see Adding and Editing Port-Based
VLANs on page 220. For information on adding tag-based VLANs, see Adding and
Editing Tag-Based VLANs on page 222.For information on adding VAPs, see
Configuring Virtual Access Points on page 333. For information on adding WDS
links, see Configuring WDS Links on page 338.
To add an internal network to a bridge
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. Click Edit in the desired network's row.
3. In the Mode drop-down list, select Bridged.