User guide

Managing Ports
Chapter 6: Managing Your Network 257
Resetting Ports to Defaults
You can reset the Safe@Office appliance's ports to their default link configurations
("Automatic Detection") and default assignments (shown in the following table).
Table 46: Default Port Assignments
Port
Default Assignment
LAN 1-4 LAN
DMZ / WAN2 DMZ
WAN This port is always assigned to the WAN.
ADSL This port is always assigned to the WAN.
Serial Console
Note: Resetting ports to their defaults may result in the loss of your Internet
connection. Therefore, it is recommended to be particularly careful when performing
this procedure remotely.