User guide

Using Network Objects
234 Check Point Safe@Office User Guide
The computer's IP address and MAC address are automatically filled in.
5. Complete the fields using the information in the tables below.
6. Click Next.
The Step 3: Save dialog box appears with the network object's name. If you are adding
a new network object, this name is the computer's name.
7. To change the network object name, type the desired name in the field.
8. Click Finish.
The new object appears in the Network Objects page.
Table 39: Network Object Fields for a Single Computer
In this field…
Do this…
IP Address Type the IP address of the local computer, or click This Computer to
specify your computer.
Reserve a fixed IP
address for this computer
and Allow this computer to
connect when MAC
filtering is enabled
Select this option to assign the network object's IP address to a
MAC address, and to allow the network object to connect to the
WLAN when MAC Filtering is used.
For information about MAC Filtering, see Configuring a Wireless
Network on page 305.
The MAC Address and Exclude this computer from 802.1x Port Security
fields are enabled.
MAC Address Type the MAC address you want to assign to the network object's IP
address, or click This Computer to specify your computer's MAC
address.