User guide

Configuring Network Settings
222 Check Point Safe@Office User Guide
Adding and Editing Tag-Based VLANs
To add or edit a tag-based VLAN
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. Do one of the following:
• To add a VLAN, click Add Network.
• To edit a VLAN, click Edit in the desired VLAN’s row.
The Edit Network Settings page for VLAN networks appears.
3. In the Network Name field, type a name for the VLAN.
4. In the Type drop-down list, select Tag Based VLAN.
The VLAN Tag field appears.
5. In the VLAN Tag field, type a tag for the VLAN.
This must be an integer between 1 and 4095.
6. In the Mode drop-down list, select Enabled.
The fields are enabled.
7. In the IP Address field, type the IP address of the VLAN network's default
gateway.
Note: The VLAN network must not overlap other networks.
8. In the Subnet Mask field, type the VLAN's internal network range.
9. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 199.
10. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 200.
11. Click Apply.