User guide

Configuring Network Settings
Chapter 6: Managing Your Network 221
5. In the Mode drop-down list, select Enabled.
The fields are enabled.
6. In the IP Address field, type the IP address of the VLAN network's default
gateway.
Note: The VLAN network must not overlap other networks.
7. In the Subnet Mask field, type the VLAN's internal network range.
8. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 199.
9. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 200.
10. Click Apply.
A warning message appears.
11. Click OK.
A success message appears.
12. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
13. Next to the LAN port you want to assign, click Edit.
The Port Setup page appears.
14. In the Assign to network drop-down list, select the VLAN network's name.
You can assign more than one port to the VLAN.
15. Click Apply.