User guide

Configuring Network Settings
Chapter 6: Managing Your Network 215
Note: OfficeMode requires either Check Point SecureClient, an L2TP client, or an
Endpoint Connect client to be installed on the VPN clients. It is not supported by
Check Point SecuRemote.
When OfficeMode is not supported by the VPN client, traditional mode will be used
instead.
To configure the OfficeMode network
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the OfficeMode network's row, click Edit.
The Edit Network Settings page appears.
3. In the Mode drop-down list, select Enabled.
The fields are enabled.
4. In the IP Address field, type the IP address to use as the OfficeMode network's
default gateway.
Note: The OfficeMode network must not overlap other networks.
5. In the Subnet Mask text box, type the OfficeMode internal network range.
6. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 199.
7. If desired, configure DHCP options.
See Configuring DHCP Server Options on page 206.
8. Click Apply.
A warning message appears.
9. Click OK.
A success message appears.