User guide

Configuring Network Settings
Chapter 6: Managing Your Network 205
The Automatic DHCP range check box is disabled, and new fields appear.
4. In the Primary DHCP Server IP field, type the IP address of the primary DHCP
server.
5. In the Secondary DHCP Server IP field, type the IP address of the DHCP server
to use if the primary DHCP server fails.
6. Click Apply.
A warning message appears.
7. Click OK.
A success message appears
8. If your computer is configured to obtain its IP address automatically (using
DHCP), and either the Safe@Office DHCP server or another DHCP server is
enabled, restart your computer.
Your computer obtains an IP address in the DHCP address range.