User guide

Configuring Network Settings
Chapter 6: Managing Your Network 199
Your computer obtains an IP address in the new range.
• Otherwise, manually reconfigure your computer to use the new
address range using the TCP/IP settings. For information on configuring
TCP/IP, see TCP/IP Settings on page 94.
Enabling/Disabling Hide NAT
Hide Network Address Translation (Hide NAT) enables you to share a single public
Internet IP address among several computers, by “hiding” the private IP addresses of the
internal computers behind the Safe@Office appliance’s single Internet IP address.
Note: If Hide NAT is disabled, you must obtain a range of Internet IP addresses
from your ISP. Hide NAT is enabled by default.
Note: Static NAT, Hide NAT, and custom NAT rules can be used together.
To enable/disable Hide NAT
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.
3. From the Hide NAT list, select Enabled or Disabled.
4. Click Apply.
A warning message appears.
5. Click OK.
• If you chose to disable Hide NAT, it is disabled.
• If you chose to enable Hide NAT, it is enabled.