User guide

Setting Up Modems
Chapter 5: Configuring the Internet Connection 177
See Setting Up an ExpressCard Cellular Modem on page 185.
Setting Up an RS232 Modem
Note: Your RS232 dialup modem and your Safe@Office appliance's Serial port must
be configured for the same speed.
By default, the appliance's Serial port's speed is 57600 bps. For information on
changing the Serial port's speed, refer to the Embedded NGX CLI Reference Guide.
To set up an RS232 dialup modem
1. Connect an RS232 dialup modem to your Safe@Office appliance's serial port.
For information on locating the serial port, see Introduction on page 1.
2. Click Network in the main menu, and click the Ports tab.
The Ports page appears.