User guide

Using Internet Setup
Chapter 5: Configuring the Internet Connection 171
In this field…
Do this…
IP Address Type the static IP address of your Safe@Office appliance.
Subnet Mask Select the subnet mask that applies to the static IP address of your
Safe@Office appliance.
Default Gateway Type the IP address of your ISP’s default gateway.
Name Servers
Obtain Domain
Name Servers
automatically
Clear this option if you want the Safe@Office appliance to obtain an IP
address automatically using DHCP, but not to automatically configure
DNS servers.
Obtain WINS
Server
automatically
Clear this option if you want the Safe@Office appliance to obtain an IP
address automatically using DHCP, but not to automatically configure the
WINS server.
Primary DNS
Server
Type the IP address of your ISP's primary DNS server.
Secondary DNS
Server
Type the IP address of your ISP's secondary DNS server.
WINS Server Type the IP address of your ISP's WINS server.
Traffic Shaper
Shape Upstream:
Link Rate
Select this option to enable Traffic Shaper for outgoing traffic. Then type a
rate (in kilobits/second) slightly lower than your Internet connection's
maximum measured upstream speed in the field provided.
It is recommended to try different rates in order to determine which one
provides the best results.
For information on using Traffic Shaper, see Using Traffic Shaper on