User guide

Using Internet Setup
Chapter 5: Configuring the Internet Connection 169
In this field…
Do this…
Service Type your service name.
If your ISP has not provided you with a service name, leave this field
empty.
Authentication
Method
Specify the authentication method to use for PPP connections, by
selecting one of the following:
• Auto. If possible, use CHAP; otherwise, use PAP. This is the
default.
• PAP
•
CHAP
Server IP If you selected PPTP, type the IP address of the PPTP server as given by
your ISP.
If you selected Telstra (BPA), type the IP address of the Telstra
authentication server as given by Telstra.
Phone Number If you selected Dialup, type the phone number that the modem should dial,
as given by your ISP.
Connect on
demand
Select this option if you do not want the appliance to be constantly
connected to the Internet. The appliance will establish a connection only
under certain conditions.
This option is useful when configuring a backup connection. For
information, see Configuring a Backup Internet Connection on page
191.