User guide

Using Internet Setup
144 Check Point Safe@Office User Guide
Configuring a Direct ADSL Connection
1. In the Port drop-down list, select ADSL.
2. Do one of the following:
• To automatically fill in the supported ADSL settings for your ISP, do the
following:
1) Click Search by country and ISP.
The ADSL Configuration Assistant opens.
2) In the Country drop-down list, select your country.
3) In the ISP / Telco drop-down list, select your ISP or telephone
company.
The ADSL Configuration Assistant closes. The Connection Type drop-down
list and the ADSL Link Settings fields are filled in with the correct values for
your ISP.
• To manually fill in the supported ADSL settings for your ISP, in the
Connection Type drop-down list, select the Internet connection type you
intend to use.
The display changes according to the selected connection type.
For PPPoA, continue at Using a PPPoA Connection on page 145.
For EoA, continue at Using an EoA Connection on page 147.
For PPPoE, continue at Using a PPPoE Connection on page 149.
For IPoA, continue at Using an IPoA (IP over ATM) Connection on page 151.
For information on configuring bridged connections, see Adding Internet
Connections to Bridges on page 274.