User guide

Wall Mounting the Safe@Office Appliance
Chapter 3: Installing and Setting Up Safe@Office 103
Connecting the Appliance to Network Printers
In models with a print server, you can connect network printers.
To connect network printers
1. Connect one end of a USB cable to one of the appliance's USB ports.
If needed, you can use the provided USB extension cord.
2. Connect the other end to a printer or a USB 2.0 hub.
Warning: Verify that the USB devices' power requirement does not exceed the
appliance's USB power adapter capabilities. Failure to observe this warning may
cause damage to the appliance and void the warranty.
For information on setting up network printers, see Setting up Network Printers on page
768.
Wall Mounting the Safe@Office Appliance
For your convenience, the Safe@Office appliance includes a wall mounting kit, which
consists of two plastic conical anchors and two cross-head screws.
To mount the Safe@Office appliance on the wall
1. Decide where you want to mount your Safe@Office appliance.
2. Decide on the mounting orientation.
You can mount the appliance on the wall facing up, down, left, or right.
Note: Mounting the appliance with the ports facing upwards is not recommended, as
dust might accumulate in unused ports.