User guide

Appliance Installation
100 Check Point Safe@Office User Guide
Installing ADSL Models
To install the Safe@Office appliance
1. Verify that you have the correct cable type.
For information, see Network Requirements on page 61.
2. Connect the LAN cable:
a. Connect one end of the Ethernet cable to one of the appliance's LAN
ports.
b. Connect the other end to PCs, hubs, or other network devices.
3. Connect the ADSL cable:
a. Connect one end of the telephone cable to the appliance's DSL port.
b. Connect the other end of the cable to the ADSL line or micro-filter.
In most cases, a micro-filter is required for each phone jack on your line. The
micro-filter prevents the standard phone lines from interfering with your ADSL
service. Check with your service provider whether a micro-filter is required at
your location.
Figure 22: Typical Connection Diagram