Technical data

Rack Mounting Check Point 12200
Rack Mounting Page 13
To attach the rail plates:
1. Attach a rail plate to an appliance rail using two appliance rail screws.
2. Do step 1 again for the other rail plate and appliance rail.
This figure shows the assembled rail plate and appliance rail.
Attaching the Appliance Rails to the Appliance
Attach the appliance rails to the sides of the appliance. Position the rail plates to connect the appliance rails
to the rear of the rack.
Note - The appliance rail screws have 8 mm heads.
To attach the appliance rails:
1. Set the appliance rail on the side of the appliance. The ridges on the appliance rails point to the
appliance. This diagram shows the appliance rail and rail plate positioned correctly:
2. Attach the appliance rails to the appliance using three appliance rail screws.
3. Do steps 1 and two again for the other side of the appliance.