Installation Guide

Table Stand
Table Stand and Wall Mount
2 31
Wall Mount
21
The Wireless Thermostat communicates wirelessly to the Receiver Box which is wired to the boiler. If the Thermostat loses
wireless communication or becomes faulty, the boiler can be switched on or off manually using the button on the Receiver
Box.
•
is displayed on the Thermostat when the wireless signal is good - The Receiver Box LED will be solid GREEN.
•
+ will flash on the Thermostat when the wireless signal is lost - The Receiver Box LED will flash RED.
• If communication is lost move the Thermostat to another location to try and restore communication.
To manually override the boiler using the Receiver Box:
1. Press the button once to switch the boiler
ON or OFF. The button LED should be:
• Solid GREEN when the boiler is ON.
• Off when the boiler is OFF.
Wireless Receiver Box
= M3.5
= N°6